Refine
Year of publication
- 2020 (22) (remove)
Document Type
- Article (22) (remove)
Language
- English (22)
Has Fulltext
- no (22)
Herein, the general constitutive equation of bi-phasic materials equipped with orientation tensor is presented in direct notation. The formulation is refined by some correction factors specific to natural fibre-reinforced composites; then, a planar case is derived. The necessity of local information is emphasised through the introduction of auxiliary maps, which included volume fraction and orientation data. A semi-analytical homogenisation method is introduced through finite element analysis. Auxiliary maps are shown to be a better alternative to the overall orientation of fibres. Global calculations are insensitive to local variations whilst appropriate auxiliary maps offer refined results. Considering the multidisciplinary application of orientation tensors, the proposed scheme can be used in all areas where local information cannot be disregarded.
Laser powder-bed fusion has become one of the most important techniques in additive manufacturing. For guaranteeing the possibility of manufacturing highly specialized and advanced components, currently intensive research is carried out in this field. One area of this research is the material-specific macroscopic anisotropy, which is investigated in our work by comprehensive static mechanical experiments. The material which was tested within this study was the precipitation-hardenable AlSi10Mg alloy, with the focus on installation space orientation. Tensile and compression tests were performed, the results for the Young's modulus in compressive loading exceeded the previously known values of this material in tensile loading and achieved values of up to 79.8 GPa. As a result of this investigation, a chemical spectroscopic analysis was undertaken and from the actual chemical composition, a relative density of 99.86% of the samples was determined.
Laser powder bed fusion has become one of the major techniques within metal additive manufacturing, especially when delicate structures and high geometric accuracy are concerned. Lately, the awareness of the material-specific macroscopic anisotropy has risen and led to widespread investigations on the static mechanical strength. However, little is known about the fracture behavior of the layer-wise fabricated metal components and their affinity of crack propagation between consecutive layers, which is particularly important for aluminium–silicon alloys containing embrittled zones in double-irradiated areas. A recent study indicated that there is a significant drop in fracture toughness in case the crack growth direction is parallel to the layering. To investigate this matter further and to shed light on the fracture toughness behavior in the range of a 0°–45° angle offset between the crack growth direction relative to the layering, notched samples with varying polar angles were subjected to mode I fracture toughness testing. Our results indicate that the fracture toughness is an almost-stable characteristic up to a mismatch of about 20° between the crack propagation path and the layering, at which point the fracture toughness decreases by up to 10%.
Metal additive manufacturing of dental prostheses consisting of cobalt−chromium−tungsten (Co−Cr−W) alloys poses an alternative to investment casting. However, metal additive manufacturing processes like Laser Powder‐Bed Fusion (LPBF) can impact the elastic constants and the mechanical anisotropy of the resulting material. To investigate the phase compositions of mechanically different specimens in dependence of their postprocessing steps (e. g. heat treatment to relieve stress), the current study uses X‐ray Diffraction (XRD), Electron BackScatter Diffraction (EBSD), and Transmission Electron Microscopy (TEM) for phase identification. Our studies connect plastic deformation of Remanium star CL alloy with the formation of the hexagonal ϵ‐phase and heat treatment with the formation of the D024‐phase, while partially explaining previously observed differences in Young's moduli.
The characteristics and atomic mechanisms (physics) of processes of thermal desorption of deuterium from isotropic graphite at temperatures 700–1700 K are considered.
Development of environment-friendly natural fiber composites has been a recent trend. However, due to the fact that natural fibers permit high level of moisture absorption from the surroundings, it can lead to weak bindings and degradation of composite properties. This paper presents an experimental study on the dynamic performance of flax fiber composite beams manufactured at different relative humidity (RH) levels. Five types of flax fiber-reinforced composite materials were made under different RH values, i.e., dry, 35%, 50%, 70%, and 95% RH, and beam samples were prepared using the composite. Impact hammer testing was conducted to measure the natural frequencies and damping of the beams. It was found that for the first three modes, while the resonant frequencies are very close for most samples, there is a clear drop of frequencies for the composite fabricated at 95% RH. Along with an increase of the RH level, the damping ratios for all the three modes have reported a slight increase, but the variation is not significant.
Das Interesse der Industrie an additiv gefertigten Bauteilen steigt z unehmend, wobei mit zunehmendem Verständnis der statischen Kennwerte nunmehr der Fokus in Richtung der dynamischen Festigkeiten wandert. Deswegen werden Einflussparameter auf die Lebensdauer und potenzielle Nachbearbeitungsmethoden untersucht und analysiert. Ein großer Einfluss ist dabei der Oberflächengüte und den durch Rautiefen initiierten Kerbeffekten zuzuschreiben. Deswegen werden unterschiedliche Methoden zur Verbesserung der Oberflächengüte untersucht. Dabei werden die Verfahren Laserpolieren, elektrochemisches Polieren und Hartmetallkugelstrahlen und deren Auswirkung auf Oberflächengüte sowie Härte untersucht. Für das elektrochemische Polieren werden die Proben in einer Perchlorsäure für 90 s bei 32 V und maximal 10 A poliert. Das Hartmetallkugelstrahlen wird mit einem UFS 100 Strahlmittel bei einem Druck von 4 bar und einer Strahldauer von 10 s ausgeführt. Anschließend werden Wöhlerlinien für die unterschiedlichen Zustände mittels Umlaufbiegeversuch ermittelt, welche mit Referenzwerten analysierter konventioneller Proben verglichen werden. Des Weiteren werden die Bruchflächen analysiert. Die Untersuchungen ergaben ein hohes Optimierungspotenzial der additiv gefertigten Proben bei einer Verdichtung der Oberfläche sowie einer Entfernung der Randschicht durch eine spanende Bearbeitung. Dadurch wurden höhere Zeitfestigkeiten als mit konventionell gefertigten Proben erreicht.
Laser powder-bed fusion (LPBF) has significantly gained in importance and has become one of the major fabrication techniques within metal additive manufacturing. The fast cooling rates achieved in LPBF due to a relatively small melt pool on a much larger component or substrate, acting as heat sink, result in fine-grained microstructures and high oversaturation of alloying elements in the α-aluminum. Al-Si-Mg alloys thus can be effectively precipitation hardened. Moreover, the solidified material undergoes an intrinsic heat treatment, whilst the layers above are irradiated and the elevated temperature in the built chamber starts the clustering process of alloying elements directly after a scan track is fabricated. These silicon-magnesium clusters were observed with atom probe tomography in as-built samples. Similar beneficial clustering behavior at higher temperatures is known from the direct-aging approach in cast samples, whereby the artificial aging is performed immediately after solution annealing and quenching. Transferring this approach to LPBF samples as a possible post-heat treatment revealed that even after direct aging, the outstanding hardness of the as-built condition could, at best, be met, but for most instances it was significantly lower. Our investigations showed that LPBF Al-Si-Mg exhibited a high dependency on the quenching rate, which is significantly more pronounced than in cast reference samples, requiring two to three times higher quenching rate after solution annealing to yield similar hardness results. This suggests that due to the finer microstructure and the shorter diffusion path in Al-Si-Mg fabricated by LPBF, it is more challenging to achieve a metastable oversaturation necessary for precipitation hardening. This may be especially problematic in larger components.
This study is concerned with the linear elasticity theory for bodies with a dipolar structure. In this context, we approach transient elastic processes and the steady state in a cylinder consisting of such kind of body which is only subjected to some boundary restrictions at a plane end. We will show that at a certain distance d=d(t), which can be calculated, from the loaded plan, the deformation of the body vanishes. For the points of the cylinder located at a distance less than d, we will use an appropriate measure to assess the decreasing of the deformation relative to the distance from the loaded plane end. The fact that the measure, that assess the deformation, decays with respect to the distance at the loaded end is the essence of the principle of Saint-Venant.