Refine
Year of publication
- 2020 (66) (remove)
Document Type
- Article (66) (remove)
Language
- English (66) (remove)
Keywords
- Elektrochemie (3)
- Lithium-Eisensulfid-Batterie (3)
- model car (2)
- Autonomous (1)
- In vitro (1)
- SW test (1)
- Scaffold <Tissue Engineering> (1)
- Stanley (1)
- autonomous (1)
- lateral control (1)
Our current mobility paradigm increasingly faces economic, ecological, and social limits in urban areas. The aim of this paper is to analyse if a fleet of shared autonomous electric vehicles (AEVs) can meet these challenges while satisfying the current requirements of privately-owned internal combustion engine vehicles (ICEVs). Therefore, analytical models have been developed to simulate and investigate the impacts of mobility behaviour in Berlin and Stuttgart (Germany). The collected data were used to calculate the fleet size, the energy consumption, the emission of particulate matter, nitrogen oxides, and the carbon footprint of different shared AEVs in comparison with privately owned ICEVs. The approach shows that the system of a shared AEV fleet could lower externalities (accident avoidance, traffic jams, free spaces, parking costs and lifetime losses) in cities and generate cost benefits for customers.
untitled document
(2020)
Interpretable neural networks based on continuous-valued logic and multicriteria decision operators
(2020)
A number of planetary boundaries, including climate change as a result of greenhouse gas emissions, has already been exceeded. This situation has deleterious consequences for public health. Paradoxically, 4.4% of these emissions are attributable to the healthcare sector. These problems have not been sufficiently acknowledged in health professions curricula. This paper addresses two main issues, humanistic learning and the application of knowledge acquisition to clinical practice. Humanistic learning principles can be used to emphasize learner-centered approaches, including knowledge acquisition and reflection to increase self-awareness. Applying humanistic principles in everyday life and clinical practice can encourage stewardship, assisting students to become agents for change. In terms of knowledge and skills application to clinical practice, an overview of varied and novel approaches of how sustainable education can be integrated at different stages of training across several health care professions is provided. The Health and Environment Adaptive Response Taskforce (HEART) platform as an example of creating empowered learners, the NurSusTOOLKIT, a multi-disciplinary collaboration offering free adaptable educational resources for educators and the Greener Anaesthesia and Sustainability Project (GASP), an example of bridging the transition to clinical practice, are described.
Waste
(2020)
Comparing multidimensional sensor data from vehicle fleets with methods of sequential data mining
(2020)
Optimized production strategy of the major capsid protein HPV 16L1 non-assembly variant in E. coli
(2020)
This paper uses several techniques to monitor the ageing of commercial LiFePO4 cells, which are cycled at 55 °C and −20 °C at various depths of discharge. Ageing at lower depth of discharge leads to higher capacity fading, as compared to higher depth of discharge. The highest capacity fading is observed using 50% depth of discharge for cycling at 55 °C, while the lowest capacity fading is observed for the cells aged at 100% depth of discharge when cycled at −20 °C. Using incremental capacity analysis and differential voltage analysis the capacity fading is monitored and underlying ageing mechanisms are described. The loss of lithium inventory and the loss of active material, especially on the cathode side, are the major degradation mechanisms for the cells. The first incremental capacity analysis peak of the discharge process can be used in our case to predict remaining life and cell capacity.
The paper presents post-mortem analysis of commercial LiFePO4 battery cells, which are aged at 55 °C and − 20 °C using dynamic current profiles and different depth of discharges (DOD). Post-mortem analysis focuses on the structure of the electrodes using atomic force microscopy (AFM) and scanning electron microscopy (SEM) and the chemical composition changes using energy dispersive X-ray spectroscopy (SEM-EDX) and X-ray photoelectron spectroscopy (XPS). The results show that ageing at lower DOD results in higher capacity fading compared to higher DOD cycling. The anode surface aged at 55 °C forms a dense cover on the graphite flakes, while at the anode surface aged at − 20 °C lithium plating and LiF crystals are observed. As expected, Fe dissolution from the cathode and deposition on the anode are observed for the ageing performed at 55 °C, while Fe dissolution and deposition are not observed at − 20 °C. Using atomic force microscopy (AFM), the surface conductivity is examined, which shows only minor degradation for the cathodes aged at − 20 °C. The cathodes aged at 55 °C exhibit micrometer size agglomerates of nanometer particles on the cathode surface. The results indicate that cycling at higher SOC ranges is more detrimental and low temperature cycling mainly affects the anode by the formation of plated Li.
Drug-induced liver toxicity is one of the most common reasons for the failure of drugs in clinical trials and frequent withdrawal from the market. Reasons for such failures include the low predictive power of in vivo studies, that is mainly caused by metabolic differences between humans and animals, and intraspecific variances. In addition to factors such as age and genetic background, changes in drug metabolism can also be caused by disease-related changes in the liver. Such metabolic changes have also been observed in clinical settings, for example, in association with a change in liver stiffness, a major characteristic of an altered fibrotic liver. For mimicking these changes in an in vitro model, this study aimed to develop scaffolds that represent the rigidity of healthy and fibrotic liver tissue. We observed that liver cells plated on scaffolds representing the stiffness of healthy livers showed a higher metabolic activity compared to cells plated on stiffer scaffolds. Additionally, we detected a positive effect of a scaffold pre-coated with fetal calf serum (FCS)-containing media. This pre-incubation resulted in increased cell adherence during cell seeding onto the scaffolds. In summary, we developed a scaffold-based 3D model that mimics liver stiffness-dependent changes in drug metabolism that may more easily predict drug interaction in diseased livers.
Electrochemical strain microscopy (ESM) is a powerful atomic force microscopy (AFM) mode for the investigation of ion dynamics and activities in energy storage materials. Here we compare the changes in commercial LiFePO4 cathodes due to ageing and its influence on the measured ESM signal. Additionally, the ESM signal dynamics are analysed to generate characteristic time constants of the diffusion process, induced by a dc-voltage pulse, which changes the ionic concentration in the material volume under the AFM tip. The ageing of the cathode is found to be governed by a decrease of the electrochemical activity and the loss of available lithium for cycling, which can be stored in the cathode.
We consider the mixed initial-boundary value problem in the context of the
Moore-Gibson-Thompson theory of thermoelasticity for dipolar bodies. We consider the case of heat conduction with dissipation. Even if the elasticity tensors
are not supposed to be positively defined, we have proven both, the uniqueness
and the instability of the solution of the mixed problem. In the case that the mass
density and the thermal conductivity tensor are positive, we obtain the uniqueness
of the solution using some Lagrange type identities.
Effect of voids in a heat-flux dependent theory for thermoelastic bodies with dipolar structure
(2020)
Due to the good mechanical properties, flax fiber-reinforced epoxy composites
are being widely used as a green alternative to glass fiber composites. However,
plant fibers absorb moisture from the environment, being in a higher moisture
uptake as the relative humidity (RH) increases. This absorbed moisture deteriorates the mechanical properties of the composites. In this study, geometric
and displacement potential function (DPF) approaches are used to predict the
mechanical properties of flax fiber-reinforced epoxy composites under environmental conditions, in particular, different RH values. The tensile properties
that were measured experimentally strongly agreed with the analytical findings.
Almost similar results were found for the tensile strain those were measured
experimentally and the one predicted by the geometric function.
However, the predicted strain values were 38% and 42% less than the experimental ones for 0% and 95% RH conditioned composites, respectively, when
DPF was used. Good conformity between the experimental, analytical, and
DPF formulation for predicting mechanical properties ensures the practical
applicability of this study. The formulations established in this work could,
therefore, be utilized to analytically solve laminated composites under specific
boundary conditions in structural applications.
The moisture absorption behavior of flax fiber-reinforced epoxy composites is deliberated to be a serious issue. This property restricts their usage as outdoor engineering structures. Therefore, this study provides an investigation of moisture in flax fibers on the performance of the flax/epoxy composite materials based on their shear responses. The ±45° aligned flax fibers exposed to different relative humidities (RH) and the vacuum infusion process was used to manufacture the composite specimens. The optimum shear strength (40.25 ± 0.75 MPa) was found for the composites manufactured with 35% RH-conditioned flax fibers, but the shear modulus was reduced consistently with increasing RH values. Although shear strength was increased because of fiber swelling with increased moisture absorption rate until 35% RH environments with good microstructures, nonetheless, strength and modulus both started to decrease after this range. A very poor microstructure has been affirmed by the SEM images of the composite samples conditioned at 90% RH environments.
In our present paper, we approach the mixed problem with initial and boundary conditions, in the context of thermoelasticity without energy dissipation of bodies with a dipolar structure. Our first result is a reciprocal relation for the mixed problem which is reformulated by including the initial data into the field equations. Then, we deduce a generalization of Gurtin’s variational principle, which covers our generalized theory for bodies with a dipolar structure. It is important to emphasize that both results are obtained in a very general context, namely that of anisotropic and inhomogeneous environments, having a center of symmetry at each point.
The objective of this study is to investigate the influence of veneering technique (hand-layering vs. milling) on the fracture resistance of bi-layer implant-supported zirconia-based hybrid-abutment crowns. Mandibular molar copings were anatomically designed and milled. Copings were then veneered by hand-layering (HL) (n = 20) and milling using the Cad-On technique (LD) (n = 20). Crowns were cemented to zirconia hybrid-abutments. Ten samples of each group acted as a control while the remaining ten samples were subjected to fatigue in a chewing simulator. Crowns were loaded between 50 and 100 N for 1.2 million cycles under simultaneous temperature fluctuation between 5 and 55 °C. Crowns were then subjected to static load a to fracture test. Data were statistically analysed using the one-way ANOVA. Randomly selected crowns from each group were observed under scanning electron microscopy to view fractured surfaces. Study results indicate that during fatigue, LD crowns had a 100% survival rate; while HL crowns had a 50% failure rate. Fracture resistance of LD crowns was statistically significantly higher than that of HL crowns at the baseline and after fatigue (p ≤ 0.05). However, fatigue did not cause a statistically significant reduction in fracture resistance in both LD and HL groups (p > 0.05). Copings fractured in the LD crowns only and the fracture path was different in both LD and HL groups. According to the results, it was concluded that milled veneer implant-supported hybrid-abutment crowns exhibit significantly higher fracture resistance, and better withstand clinical masticatory loads in the posterior region compared to the hand-layered technique. Also, fatigue application and artificial aging caused no significant strength reduction in both techniques. Clinical significance: Different veneering techniques and materials (hand-layering or milling) act differently to clinical forces and environment and may be prone to early chipping during service. Therefore, practitioners are urged to consider the appropriate veneering protocol for posterior implant-supported hybrid-abutment restorations.
Our study is dedicated to a composite, which, in fact, is a mixture of two thermoelastic micropolar bodies. We formulate the mixed initial boundary value problem in this context and define the domain of influence for given data. For any solution of the mixed problem we associate a measure and prove a second-order differential inequality for it. Based on the maximum principle for the heat equation and on the second-order differential inequality, we establish an estimate which proves that the thermal and the mechanical effects, at large distance from the domain of influence, are dominated by an exponential decay.
The aim of the current work was to illustrate the effect of the fibre area correction factor on the results of modelling natural fibre-reinforced composites. A mesoscopic approach is adopted to represent the stochastic heterogeneity of the composite, i.e. a meso-structural numerical model was prototyped using the finite element method including quasi-unidirectional discrete fibre elements embedded in a matrix. The model was verified by the experimental results from previous work on jute fibres but is extendable to every natural fibre with cross-sectional non-uniformity. A correction factor was suggested to fine-tune both the analytical and numerical models. Moreover, a model updating technique for considering the size-effect of fibres is introduced and its implementation was automated by means of FORTRAN subroutines and Python scripts. It was shown that correcting and updating the fibre strength is critical to obtain accurate macroscopic response of the composite when discrete modelling of fibres is intended. Based on the current study, it is found that consideration of the effect of flaws on the strength of natural fibres and inclusion of the fibre area correction factor are crucial to obtain realistic results.
Hot isostatic pressing can be utilized to reduce the anisotropic mechanical properties of Al–Si–Mg alloys fabricated by laser powder-bed fusion (L-PBF). The implementation of post processing densification processes can open up new fields of application by meeting high quality requirements defined by aircraft and automotive industries. A gas pressure of 75 MPa during hot isostatic pressing lowers the critical cooling rate required to achieve a supersaturated solid solution. Direct aging uses this pressure related effect during heat treatment in modern hot isostatic presses, which offer advanced cooling capabilities, thereby avoiding the necessity of a separate solution annealing step for Al–Si–Mg cast alloys. Hot isostatic pressing, followed by rapid quenching, was applied to both sand cast as well as laser powder-bed fused Al–Si–Mg aluminum alloys. It was shown that the critical cooling rate required to achieve a supersaturated solid solution is significantly higher for additively manufactured, age-hardenable aluminum alloys than it is for comparable sand cast material. The application of hot isostatic pressing can be combined with heat treatment, consisting of solution annealing, quenching and direct aging, in order to achieve both a dense material with a small number of preferred locations for the initiation of fatigue cracks and a high material strength.
The methodology of the approximation and interpretation of thermal desorption spectra (TDS) of hydrogen in some carbon nanostructures and graphite has been developed and applied for such materials.
The methodology is based on a definite approximation by the symmetrical Gaussians of the hydrogen thermal desorption spectra, obtained by using one single heating rate, for carbon materials and nanomaterials, and a definite processing of the Gaussians, in the approximation of the first-order reactions and the second-order ones. It results in determining (with a satisfactory accuracy, for the further physical analysis), from TDS data of one single heating rate, the activation energies and pre-exponential factors of the rate constants of desorption processes corresponding to the main TDS peaks with different temperatures of the maximum desorption rate. The developed methodology contains several successive steps of its implementation, including the use of several “criterions of truth” and the final verification and/or modification of the results, with the help of numerical modeling methods. This technique is not less informative, but much less time-consuming in experimental terms compared to the generally accepted classical Kissinger method, which demands using of several heating rates, and has strict limits of applicability. Furthermore, the methodology allows one to reveal physics and atomic mechanisms of the main desorption processes through thermodynamic analysis of the obtained peak characteristics and comparison with the corresponding independent experimental and theoretical data.
The purpose of such a methodology is to further reveal the weakly studied physics of the main states of hydrogen in carbon materials and nanomaterials, and not the thorough detailed mathematical description of the spectra. For this case, both the large difference and the large spread of the known experimental and theoretical values of the thermodynamic characteristics of the main desorption processes, important for hydrogen storage problems, are also taken into account.
Background:
Glaucoma, a characteristic type of optic nerve degeneration in the posterior pole of the eye, is a common cause of irreversible vision loss and the second leading cause of blindness worldwide. As an optic neuropathy, glaucoma is identified by increasing degeneration of retinal ganglion cells (RGCs), with consequential vision loss. Current treatments only postpone the development of retinal degeneration, and there are as yet no treatments available for this disability. Recent studies have shown that replacing lost or damaged RGCs with healthy RGCs or RGC precursors, supported by appropriately designed bio-material scaffolds, could facilitate the development and enhancement of connections to ganglion cells and optic nerve axons. The consequence may be an improved retinal regeneration. This technique could also offer the possibility for retinal regeneration in treating other forms of optic nerve ailments through RGC replacement.
Methods:
In this brief review, we describe the innovations and recent developments in retinal regenerative medicine such as retinal organoids and gene therapy which are specific to glaucoma treatment and focus on the selection of appropriate bio-engineering principles, biomaterials and cell therapies that are presently employed in this growing research area.
Results:
Identification of optimal sources of cells, improving cell survival, functional integration upon transplantation, and developing techniques to deliver cells into the retinal space without provoking immune responses are the main challenges in retinal cell replacement therapies.
Conclusion:
The restoration of visual function in glaucoma patients by the RGC replacement therapies requires appropriate protocols and biotechnology methods. Tissue-engineered scaffolds, the generation of retinal organoids, and gene therapy may help to overcome some of the challenges in the generation of clinically safe RGCs.