TY - JOUR U1 - Zeitschriftenartikel, wissenschaftlich - begutachtet (reviewed) A1 - Sert, E. A1 - Hitzler, L. A1 - Hafenstein, S. A1 - Merkel, M. A1 - Werner, E. A1 - Öchsner, A. T1 - Tensile and compressive behaviour of additively manufactured AlSi10Mg samples JF - Progress in Additive Manufacturing N2 - Laser powder-bed fusion has become one of the most important techniques in additive manufacturing. For guaranteeing the possibility of manufacturing highly specialized and advanced components, currently intensive research is carried out in this field. One area of this research is the material-specific macroscopic anisotropy, which is investigated in our work by comprehensive static mechanical experiments. The material which was tested within this study was the precipitation-hardenable AlSi10Mg alloy, with the focus on installation space orientation. Tensile and compression tests were performed, the results for the Young's modulus in compressive loading exceeded the previously known values of this material in tensile loading and achieved values of up to 79.8 GPa. As a result of this investigation, a chemical spectroscopic analysis was undertaken and from the actual chemical composition, a relative density of 99.86% of the samples was determined. Y1 - 2020 U6 - https://doi.org/https://doi.org/10.1007/s40964-020-00131-9 DO - https://doi.org/https://doi.org/10.1007/s40964-020-00131-9 VL - 2020 IS - 3 SP - 305 EP - 313 PB - Springer CY - Cham ER -